Loading...
Serving Delano, CA and surrounding areas. (661) 553-7018
Dips, cracks, and uneven spots in your floor cause tile failures, squeaky planks, and doors that stick. We pour and level it flat so your next flooring install goes in right the first time.
Self-leveling concrete in Delano is a pourable material that spreads itself flat, filling dips and low spots in existing floors - most jobs in a single room or garage take one to two days, with the floor walkable within a few hours.
Homeowners in Delano typically call us for one of two situations. The first is a floor that has developed noticeable dips or unevenness over the years - a common result of the area's clay-heavy soil shifting through wet winters and dry summers. The second is a floor that is going to have new tile, luxury vinyl, or hardwood installed, and the flooring installer has flagged that the surface is not flat enough to proceed. Self-leveling concrete fixes both. If the floor is already level but just looks worn or stained, a concrete overlay may be the faster and more cost-effective answer - similar to what we do with concrete resurfacing and overlays.
The key to a job that lasts is what happens before the pour. Surface prep, moisture testing, and crack repair all have to be done correctly - otherwise the new material fails no matter how good the pour is.
If a marble rolls on its own across your floor, or you feel a dip near a doorway or in the middle of a room, the slab has likely shifted or settled. This is common in Delano homes built on clay-heavy soil, where decades of wet and dry cycles cause the ground to move underneath. An uneven floor can cause tile to crack, doors to stick, and new flooring to fail prematurely.
Tile, luxury vinyl plank, and hardwood all require a very flat surface to install correctly. Even small dips cause tiles to crack or planks to squeak and flex. If a flooring installer has flagged this issue, self-leveling concrete is exactly the fix - it is the step that happens right before new flooring goes in.
Small hairline cracks are normal in older concrete. But if you are seeing cracks that keep coming back after patching, or edges at different heights, the slab may need more than a simple repair. In Delano's climate, where summer heat and dry spells stress concrete every year, cracks tend to grow if left alone.
A musty smell near the floor, white powdery deposits on the concrete surface, or floor coverings peeling up from the edges can all signal moisture coming up through the slab. This is a known issue in parts of Delano near irrigated farmland and needs to be addressed before any new floor material goes on top.
We handle self-leveling pours for floors that need to be flattened before new flooring goes in, garage floors being converted to gym or workshop space, utility rooms with settled spots, and any interior concrete that has developed unevenness over time. Every job starts with a moisture test and surface prep - grinding down high spots, filling deep cracks, and vacuuming before the pour so the new material bonds properly and stays put. For surfaces that need a visual refresh on top of the leveling work, we can apply a decorative concrete overlay after the pour has cured. For pool deck areas with similar leveling needs, we also offer pool deck coatings and resurfacing with slip-resistant finishes suited to Delano's outdoor conditions.
The thickness of the pour depends on how uneven your floor is. Self-leveling compounds are typically poured between a quarter inch and one inch thick - your contractor will measure the low spots before determining how much material is needed. We also carry slower-setting mixes for summer pours when Delano's heat would otherwise cause the material to set before it has fully spread.
Suits homeowners installing tile, LVP, or hardwood who need a flat, stable base to the tolerance their flooring installer requires.
Suits garages being converted to workshops, gyms, or cleaner utility space where both a flat surface and a finished look are needed.
Suits interior rooms where the floor will be the finished surface - tinted, sealed, or polished to look like new concrete.
Suits homes near irrigated farmland where elevated slab moisture needs to be addressed before any new floor material is applied.
Delano sits on soils with a high clay content, which is common throughout Kern County and the southern San Joaquin Valley. Clay soils expand when wet and shrink when dry - and in a region with hot, dry summers and wet winters, that cycle runs every single year. Over time, that movement causes residential slabs to shift, settle, and develop uneven spots. Homes built in the 1950s through 1980s - a large share of Delano's housing stock - are especially likely to have floors that have drifted out of level over decades of this soil movement. Add in the proximity to active farmland and the seasonal irrigation that raises moisture levels in the ground, and you have a set of conditions that make self-leveling concrete work genuinely common here. The American Concrete Institute sets the industry standards for concrete floor tolerances and placement practices that guide this type of work.
We work regularly in Earlimart and Wasco, where older housing stock and the same clay soil conditions produce the same leveling needs. Understanding the local soil behavior and moisture patterns is not optional for this type of work - it directly affects which materials and prep steps are right for each job.
Tell us what room or area you are dealing with and what the floor looks like now. We reply within one business day and schedule an on-site visit - no charge for the estimate.
We measure the floor with a level, check for cracks and soft spots, and test for moisture coming up through the slab. This visit determines what the floor actually needs and what it will cost - you get a written estimate before we schedule anything.
Prep takes as long as the pour itself - grinding high spots, filling deep cracks, and vacuuming dust before the material goes in. Summer jobs are scheduled for early morning to avoid peak heat that can cause the mix to set before it fully spreads.
The floor is usually walkable within a few hours. Heavy furniture and flooring installation should wait 24 to 48 hours. We walk you through the timeline before we leave so your flooring crew knows exactly when they can start.
Free on-site estimate. Written quote before any work begins. No obligation.
(661) 553-7018Homes near Delano's agricultural areas can have elevated moisture coming up through the slab - especially after irrigation seasons. We test every floor before we start and apply a moisture barrier when the reading calls for it. Skipping this step is one of the most common reasons leveling jobs fail early, and we do not skip it.
Kern County's clay-heavy soil is the reason most Delano floors develop uneven spots in the first place. We assess whether the slab is still actively shifting before recommending a pour - because a leveling job on a floor that is still moving is a floor that will need to be leveled again.
California requires any contractor doing work over $500 to hold a valid state license. We carry our C-8 concrete contractor license and provide a written contract before work starts. You can verify any contractor at the California Contractors State License Board.
We level to the flatness tolerance your specific flooring type requires - tile needs a tighter tolerance than carpet, and luxury vinyl plank is less forgiving than most homeowners expect. We confirm the spec with you or your flooring installer before the pour so there are no callbacks.
Getting the floor flat once and keeping it flat requires understanding the specific conditions in this part of Kern County. That is what separates a leveling job that holds from one that needs to be redone. Call or message us to schedule a free floor assessment.
Durable, slip-resistant coatings for pool surrounds that stand up to Delano sun and heat.
Learn MoreRefresh worn driveways and patios with a bonded overlay - no slab replacement needed.
Learn MoreSpring and early fall slots fill fast in Kern County - schedule your free assessment now and avoid delays when your flooring crew is ready to start.